R&S CMW-KG8 Series, User Manual

Page: 76 / 964

1xEV-DO Signaling
R&S
®
CMW-KG8xx/-KM8xx/-KS8xx
76 User Manual 1173.9511.02 ─ 11
2.4.7.7 Reverse Power Control
Fig. 2-31: 1xEV-DO reverse power control settings
Power Control Bits ........................................................................................................ 76
Step Size .......................................................................................................................76
Repetition ...................................................................................................................... 77
Segments ...................................................................................................................... 77
Run Sequence .............................................................................................................. 77
Power Control Bits
Defines a power control bit pattern which the R&S CMW transmits in order to control
the transmitter output power of the AT (closed loop power control; see standard
3GPP2 C.S0002).
●
Auto : Active closed loop power control: sends the power control bits needed to
control the AT power to the "Manual Expected Power".
●
All Up : Sends a sequence of power up bits.
●
All Down : Sends a sequence of power down bits.
●
Hold : Sends alternating power up and power down bits to keep the output power in
the vicinity of a constant value.
●
Pattern : Sends the user specific segment bits executed by the command Run
Sequence .
Option R&S CMW-KS890 is required for "Pattern".
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
RPControl:
​
PCBits
​
Step Size
Defines the power control step size, i.e. the nominal change in mean output power per
single power control bit.
Option R&S CMW-KS890 is required.
Remote command:
CONFigure:
​
EVDO:
​
SIGN<i>:
​
RPControl:
​
SSIZe
​
GUI Reference
深圳德标仪器
135-1095-0799