R&S AREG800A, User Manual

Page: 216 / 411

Network operation and remote control
R&S
®
AREG800A
216 User Manual 1179.3615.02 ─ 01
– Chapter 10.2.2, "USB interface" , on page 181
– Chapter 10.2.3, "GPIB interface (IEC/IEEE bus interface)" , on page 182
●
A remote control program must open a connection to the instrument, before it can
send commands to and receive device responses from the instrument.
If security is a concern, see:
●
Document Instrument Security Procedures.
●
Chapter 9.4.5, "How to prevent unauthorized access" , on page 171.
● How to find the VISA resource string .................................................................... 216
● Establishing a remote control connection over the LXI browser interface ............ 217
● Establishing a remote control connection over LAN using VXI-11 protocol .......... 217
● Establishing a remote control connection over LAN using socket communication
.............................................................................................................................. 222
● Setting up a remote control connection over USB ................................................ 223
● How to trace messages with the LXI web browser interface .................................224
● How to return to manual operation ........................................................................224
10.8.1 How to find the VISA resource string
► Select "System Config > Remote Access > VISA Resource Strings".
The dialog shows all specified resource strings of the supported remote control
interfaces.
Controlling the R&S AREG800A remotely