RF connections
R&S
®
ZCxxx
24
Getting Started 1177.5156.02 ─ 05
5.3
Output connectors (MEAS OUT, REF OUT)
For the R&S
ZNA standard setup, proceed as follows:
1. Connect the MEAS OUT connectors of the converters to the IF Meas connec-
tors of the R&S
ZNA.
2. Connect the REF OUT connectors of the converters to the IF Reference con-
nectors of the R&S
ZNA.
Use the same VNA port number for the RF IN, MEAS OUT, and REF OUT
connection of a converter.
Suitable cables for connecting the output connectors to the network analyzer are
included in the converter shipment. The connectors of these cables are labeled
accordingly.
5.4
Adaption kits R&S
ZCAKN
use the following
Rohde
&
Schwarz network analyzer accessories:
●
Cables
– R&S
ZV-Z195: Test port cable 0
Hz to 40
GHz, 2.92
mm
(f) – 2.92
mm (m)
Adaption kits R&S
ZCAKN
