Basic operation
R&S
®
ZCxxx
28
Getting Started 1177.5156.02 ─ 05
"Converter 1" is the converter connected to VNA port 1, "Converter 2" the con-
verter connected to VNA port 2.
2. In the "Converter Configuration" dialog, verify that your R&S
ZNA has regis-
tered your converters.
The "Converter Type" combo-boxes list R&S
ZCxxx converters as "ZCxxx-
<serial>". If one of your converters is missing, reestablish the USB connection
and wait for it to show up.
3. Still In the "Converter Configuration" dialog, configure the standard setup with
two converters:
a) Select the converter connected to VNA port 1 as "Converter 1", and the
converter connected to VNA port 2 as "Converter 2".
b) For both converter ports, select "Rear IF" as "IF Input".
c) In the combo box above the "Splitter 1" symbol, select "Conv. LO" as LO
source.
d) For both converter ports, select "Splitter 1" as the source for the "Local"
port.
Configuring the converter setup
