SM1 I&M MANUAL/EN/11.16.2010
11/73
This document and the information contained herein, is the exclusive property of R&M MATERIALS HANDLING, INC. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M MATERIALS
HANDLING, INC. Copyright © (2010) R&M MATERIALS HANDLING, INC. All rights reserved.
2.4
Load Hook Throat Opening
m
CAUTION: ANSI B30.16-1998 recommends that the throat opening of a load hook be measured
and recorded prior to putting a hoist into service and that a gauge be made to provide a quick
visual inspection for a bent hook as required during routine inspections. Record this
information before initial start-up. See section 6.11 for more detailed hook information.
