<BACK
NEXT>
ENTER
ESC
MENU
BYPASS
PARAMETER
USB
DEFAULT 1
DEFAULT 2
DEFAULT 3
DSC36
LIMIT
0dBu
-48dBu
MUTE
LIMIT
0dBu
-48dBu
MUTE
LIMIT
0dBu
-48dBu
MUTE
LIMIT
0dBu
-48dBu
MUTE
LIMIT
0dBu
-48dBu
MUTE
OUTPUT
INPUT
1. Functions
Front panel
Page 4
Page 13
User's Manual
User's Manual
8. Upload data from device, firstly the data will be uploaded when connecting to
device.
you can choose
‘
recall progran from device
’
from the menu------
communications, and do the some process as Fig 2.6.
Fig 2.6
1. LCD Screen: Shows, by default, the name of the last recalled memory on the bottom line of the
screen, Also used to show all parameters as they are edited, and all menu selections.
2. BACK key moves backwards through list of parameters.
3. MENU key activates the main menu .
4. BYPASS will flatten the currently selected parametric sections, or input graphic equalisers.
5. NEXT key moves forward through list of parameters.
6. ENTER key enters the chosen menu, confirms selections, and changes filter types when editing
parametric sections.
7. ESC exits menus back to the default screen.
8. Rotary Encoders: Three encoders adjust the relevant parameters as displayed on the screen.
9. INPUT EDIT buttons illuminate red when pressed, and go into mute mode. if press for I second, it go in
to every input channel EDIT mode.
10. OUTPUT EDIT buttons illuminate red when pressed, and go into mute mode. if press for I second, it
go in to every output channel EDIT mode.
11. INPUT METERS: show dBu clipping point of digital to analogue converters, Green LED illuminates
from -48dBu to 0dBu, yellow LED illuminates the clipping.
12. OUTPUT METERS: show dBu clipping point of digital to analogue converters, Green LED illuminates
from -48dBu to 0dBu, yellow LED illuminates the clipping.
13. USB Connector, Used to be sent or received information from computer by PC software.
14. Scene change recall key. Press switch for 1 second
，
processor will load default set program.
7. Dowhoad data to Device. Choose
‘
Program
’
menu ------
communications then choose the program from PC and which memory you want
to put at the device
program 20 to 30 is protected , you can down data to these 10 memories with
** *
input password .
please get the password from your dealer
DSC36
DSC36
1
4
5
2 3
6
7
9
11
12
13
8
14
10
