background image

Page  14

1. Read all the SAFETY INSTRUCTIONS before using the product.
2. This product must be earthed. If it should malfunction or break down, grounding provides a path of least 

resistance for electric current to reduce risk of electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a grounding  plug;
The plug must be plugged into an appropriate outlet that is properly installed and earthed in accordance 
with all local   codes and ordinance.

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric 

shock.

3.  Do  not  use  this  product  near  water  -  for  example,  near  a  bathtub,  washbowl,  kitchen  sink,  in  wet 

basement or near a swimming poor or the like.

4.  This  product  should  be  located  away  from  heat  sources  such  as  radiators,  heat  registers  or  other 

products that produce heat.

5.  The  product  should  be  connected  to  a  power  supply  only  of  the  type  described  on  the  operating 

instructions or as marked on the product.

6. The power-supply cord of the product should be unplugged from the outlet when left unused for a long 

period  of  time.  When  unplugging  the  power-supply  cord,  do  not  pull  on  the  cord,  but  grasp  it  by  the 
plug.

7.  Care  should  be  taken  so  that  object  do  not  fall  and  liquid  are  not  spilled  into  the  enclosure  through 

openings.

8. The product should be serviced by qualified service personnel when:
     A. The power-supply cord or the plug has been damaged; or
     B. Objects have fallen, or liquid has been spilled into the product; or
     C. The product has been exposed to rain; or

     D. The product does not appear to operate normally or exhibits a marked change in performance; or

     E. The product has been dropped or the enclosure damaged.
9. Do not attempt to service the product beyond that described in the user-maintenance instructions. All 

other servicing should be referred to qualified service personnel.

WARNING

  -

  Do  not  place  objects  on  the  product's  power  cord  or  place  it  in  a  position  where  anyone 

could trip over, walk on or roll anything over it. Do not allow the product to rest on or to be installed over 
power  cords  of  any  type.  Improper  installations  of  this  type  create  the  possibility  of  fire  hazard  and/  or 
personal injury.

SAVE THESE INSTRUCTIONS

WARNING

Page 3

User's Manual

User's Manual

Fig  2.7

Fig  2.8

9.  Choose  copy  menu  to  copy  data  from  the  edited  one  to  other  input/output  channel 

10.  Modify  Device 
       choose  interface  menu  to  set  up  the  start  up  information  of  the  device 

DSC36

DSC36

Summary of Contents for DSC36











Reviews: