R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
Page | 6
Abbildung 3
MONTAGEANLEITUNG
•
Den oberen Flansch des Gummi-Gewindeeinsatzes in die Vertiefung an der Rückseite der Abdeckung einsetzen
wie in Abbildung 1 abgebildet.
•
Den Gewindeeinsatz durch den oberen Flansch eindrehen und die Einheit einsetzen – die Schraube anziehen, bis
das Gummi des Gewindeeinsatzes anfängt, sich auszudehnen wie in Abbildung 2 abgebildet.
•
Die Einheit an der Gabelbrücke anbringen wie in Abbildung 3 abgebildet – während Sie den Einsatz eindrücken
ziehen Sie die Schraube an, bis der Einsatz sich selbst in Position befestigt.
•
Überprüfen Sie regelmäßig, dass die Steuerrohr-Abdeckung sicher befestigt ist.
AUSGABE 1 20/02/2018 (HB)
Eine digitale Version dieser Montageanleitung kann auf folgender Seite heruntergeladen werden:
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do not diminish their performance or visual appeal and
supplying them in such state shall conform to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those in
R&G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other
services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the
motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the
Products have been modified or used or maintained otherwise than in accordance with R&G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or neglect.
Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be
limited to the amounts paid by the Buyer for the Products or the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.
R&G RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary).
Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the opinion of R&G. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P
– at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your
statutory rights and does not refer to faulty goods.
