R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
- 4 -
Page | 4
OUTILS REQUIS
Clé Allen 3mm.
Blocage fileté (Bleu).
NOTICE DE MONTAGE
Prenez l’attache puis placez-la autour de la base de la béquille latérale, avec les trous orientés
vers le haut puis positionner la autour de la base de la béquille.
Monter la base plate au-dessous de la base de béquille latérale.
Appliquer un peu de superglue (un filet) dans le blocage de filetage (Bleu) sur l’extrémité du
filetage de chaque vis.
Insérer les 3 boulons M5 pour emboiter les 2 plaques ensemble puis fixer sur le pied de
béquille latérale.
Serrer tous les boulons de façon identique puis vérifier que le coussin de béquille latérale ne
touche pas la chaine en position relevée.
Si l’installation s’effectue sur une béquille usée, la bande de rembourrage doit être placée sur
la base plate pour assurer une installation plus précise.
ISSUE 1 23/10/2017 (AR)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do
not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The Buyer acknowledges no
representation or warranty (other than as to title) has been given or will apply to the Products other than those in R&G’s order or confirmation and
the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits the
Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been
disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On return of any
defective Products R&G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products have
been modified or used or maintained otherwise than in accordance with R&G’s or manufacturer’s instructions and good engineering practice or if
the defect arises from accident or neglect. Other than identified above and subject to R&G not limiting its liability for causing death and personal
injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the
Products or the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.
R&G RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased
direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the
opinion of R&G. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P – at the prevailing price at time of
purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy
does not affect your statutory rights and does not refer to faulty goods.
