Page
10
of
25
LP0289BK
R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
If using Mini indicators
•
If using mini’s
fit the indicators of choice to the indicator/licence plate mounting bracket
(
item 1
) (R&G mini indicator product code RG371 for LED type or RG372 for Aero Style led
type) using the four indicator adaptors (
item 2
) as shown in the pictures below and tighten
the nut.
•
Feed the indicator wiring through one of the nut/wire covers (
item 11
) as shown in
pictures below
(it helps if a small amount of liquid detergent is used) and position the nut
cover over the nut (repeat the above for the opposite indicator).
•
Fit one length of heat-shrink (
item 14
) over the wires of each indicator so the heat-shrink
fits over the stem of the nut/wire cover and gently heat until the heat-shrink contracts to
the wiring and nut/wire cover as shown in
pictures below
.
•
Fit the new licence plate illuminator (
item 16
) to the new licence plate bracket (
item 1
) as
shown in
pictures 21 and 22
.
•
PLEASE NOTE YOU WILL NEED TO GLUE THE LIGHT SHROUD TO THE LED LICENCE
PLATE ILLUMINATOR USING A SUITABLE ADHESIVE.
•
Use the cable ties and clips (
items 3 and 12
) to neaten and tidy the wiring as shown in
picture 23
ensuring to leave room around the slot for bolts and washers when fully
assembled.
•
Stick the self-adhesive neoprene foam (
item 13
) to the mounting bracket (
item 18
) as
shown in
picture 24
.
•
Using the three short M6 button head bolts (
item 19
) with the larger washers (
item 17
)
mount the main mounting bracket (
item 18
) to the indicator/licence plate bracket assembly
