LEGEND
ITEM 1= LICENCE PLATE BRACKET (TB0092 PT2) (x1).
ITEM 2= BAG OF ELECTRICAL CONNECTORS (CON4) (x1).
ITEM 3= RUBBER GROMMETS (RB0003) (x3).
ITEM 4= LICENCE PLATE ADAPTOR PLATE (TB0092 PT1) (x1).
ITEM 5= LICENCE PLATE LIGHT (LA0002) (x1).
ITEM 6= M6x6mm LONG BUTTON HEAD BOLTS (x5).
ITEM 7= LIGHT SHROUD (LH0004) (x1).
ITEM 8= SMALL RUBBER GROMMETS (RB80-30-00) (x2).
ITEM 9= BAG OF ELECTRICAL CONNECTORS, NUTS AND WASHERS (PART OF LA0002) (x1).
ITEM 10=150mm LENGTH OF HEAT SHRINK (666-896) (x1).
ITEM 11= REFLECTIVE STRIP (REFL1) (x1).
ITEM 12= CABLE CLIPS (CLIP1) (x5).
Please note that in cases where kits are packed with rubber washers holding the components onto
the bolt –
the rubber washers should be thrown away
!
TOOLS REQUIRED
Set of metric Allen keys to include 4mm A/F sizes.
Set of Torx keys to include T20 and T25 sizes.
Electrical pliers/crimps.
Super glue.
FITTING INSTRUCTIONS
PICTURE
1
PICTURE
2
REMOVE PILLION SEAT USING KEY (SEE PICTURE 1).
UNCLIP AND DISCONNECT WIRING PLUG (LARGER ARROW IN PICTURE 2).
UNDO AND REMOVE CLAMP SCREW (SMALLER ARROW IN PICTURE 2).
UNCLIP ALARM FROM ITS MOUNTING BRACKET (DO NOT UNPLUG) AND REST
ON FUSE BOX (TO ALLOW ACCESS TO ALARM MOUNTING BRACKET).
