Page
18
of
27
AB0036
R&G
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
Email:
•
Serrer complètement les boulons de barre de connexion inférieur, aux valeurs de serrage
recommandées, en utilisant une clé Allen 4mm.
•
Placer le bouchon en caoutchouc M10 (article 13) sur la tête du boulon, voir photo 12.
•
A ce stade, vérifiez par 2 fois que la barre de connexion soit fixée et ne puisse pas toucher
l’échappement ou le moteur, et que les boulons soient correctement serrés. Faites un tour
avec la moto, puis revérifiez la position des barres et le serrage du boulon, puis ajustez si
nécessaire.
•
Vérifiez régulièrement le serrage des boulons<, lors du nettoyage de la moto par exemple,
pour veiller à ce qu’ils restent correctement serrés, et que les Barres Aventure restent en
position.
ISSUE 1 18/02/2019 (DM)
CONSUMER NOTICE
The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make
design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to
the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the
Products other than those in R&G’s order or confirmation and the Buyer confirms it has chosen the Products as being of
merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other services it
shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The
Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On
return of any defective Products R&G shall at its option either supply a replacement or refund the purchase money but shall
not be liable if the Products have been modified or used or maintained otherwise than in accordance with R&G’s or
manufacturer’s instructions and good engineering practice or if the defect arises from accident or neglect. Other than
identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be liable for
indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or
the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.
R&G RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us
if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor.
Goods must be in re-sellable condition, in the opinion of R&G. All returns are subject to a 25% restocking and handling fee
(25% of the gross value exc. P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage
charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your statutory
rights and does not refer to faulty goods.
