R&D COMBI Series, Service Manual

Page: 32 / 57

32
用十字螺丝刀将压缩机后盖板上、左、右侧共
8
颗
螺钉旋下，再向上提即可将其拆掉。
Use a Phillips screwdriver to unscrew the 8 screws on
the left and right side of the rear cover of the
压缩机接线盒
Terminal box of the compressor
1.
拆卸保护罩
1
）从上部慢慢撬开保护罩，使得卡扣脱落
2
）向外拔出拆下
1. Remove the protective cover
1) Pry the protective cover slowly from the upper
part,
2) Pull it out and remove it.
2.
相反工序可完成安装
5. The reverse process can complete installation.
/
冷凝风扇电机
Condenser fan motor None
副冷凝器
Standby condenser None
压缩机仓管路系统
Piping system in the compressor case
Welding in the compressor case
8
7
3
1
2
8
4
9
5
6
11
10
0