A
.
DISPLAY MUST BE REMOVED FROM GONDOLA
On underside of display, on the left
and right, remove safety brackets
securing display to gondola by
removing screw, then place brackets
and screws aside.
B
Remove display from gondola by lifting it up then
pull it forward. Place display on shelf (not
shown), leaving it plugged in and powered.
C
Remove back panel by removing screws to
expose the media player.
Blue light on media
player confirms it is powered.
D
Switch media player power to
OFF
. Remove
existing SD card by pushing it down and then
pulling it out. Discard this SD card.
REMOVING DISPLAY FROM GONDOLA ---
TWO PEOPLE REQUIRED
media
player
media player
power switch
SD card
1
TWO PEOPLE REQUIRED
Rand McNally OverDryve Display ME-01 - Refresh Option C
1 of 15
19607-1 P77343 7-9-17
