E
Unplug plastic connector on button wires PB10.
G
Following steps below, remove PB10 button from dash mount pod and then
attach PB10 button to the new OverDryve TND-740 pod.
Remove dash mount from pod by removing 4 acorn nuts. Place dash
mount aside until later step. Discard metal parts of dash mount pod.
F
Remove dash mount pod through bottom of display
and set aside.
• unscrew plastic nut
• remove plastic nut, place aside for re-use
• remove button, place aside for re-use
1
2
3
• remove 4 acorn nuts on dash mount pod
Removing Buttons
Removing Dash Mount
• remove dash mount, discard all other parts
• place dash mount aside for later steps
4
5
6
front
back
remove
acorn
nuts
remove
dash
mount
unscrew
plastic
nut
remove
plastic
nut
remove
button
place
aside
19607-1 P77343 7-9-17
10 of 15
Rand McNally OverDryve Display ME-01 - Refresh Option C
