Rand McNally intelliroute TND 515 User Manual Download

Page: 14 / 56

Rand McNally IntelliRoute

TND

™

User Manual

2. Settings

Route Preferences

Options

Route Preferences

Options

Note:

The default settings for your device are already optimized for

truck routing. Use the options below to fine-tune these settings.
A route may still include a roadway or maneuver set to Avoid if the
only legal route found contains these types of roads or the route is
over several hundred miles.

Turn Announcement

Set three distances at which you want

to be warned about an upcoming turn.

The first announcement will be the farthest

from the turn and the third the closest to it.

Truck ETA Adjustment

Increase ETA more (by 15%)

Increase ETA some (by 5%)

ETA ok

Decrease ETA some (by 5%)

Decrease ETA more (by 10%)

Set adjustments to your ETA due to

weather or traffic conditions. You can

add (increase) time to make the trip

take longer or subtract (decrease) time

to make the trip take less time.

Recalculation

Manual recalculate

Auto recalculate

Route

Fastest route

Shortest route

Freeways

Allow all (default)

Avoid freeways

Prefer freeways

Avoid small roads

Tollways

Allow tollways

Avoid tollways

U-Turns

Allow u-turns

Avoid u-turns

Ferries

Allow ferries

Avoid ferries

States/Provinces to Avoid

Tap the bottom right corner to access

a list of states/provinces. Check the box

to avoid.

Cross-Country Borders

Allow cross borders

Avoid cross borders

Dirt Roads

Allow dirt roads

Avoid dirt roads

Tunnels

Allow tunnels

Avoid tunnels

Avoid List

Tap on the map and select a road segment

to add it to the Avoid List. (See page 23.)

Fast Recalc

Off

Fact recalc calculates a route to a midpoint

between your location and the destination,

rather than recalculating the entire route

from scratch. Best used on a long route

that has short distances between

intersections.

Junction View Distance

Set the distance before the maneuver

at which the highway junction view

screen appears.

Turn View Distance

Set the distance before the maneuver at

which the local street turn view screen

appears. (Note: In 3D map view, this

warning is not needed and will be

turned off.

Summary of Contents for intelliroute TND 515

























































Search results

Summary of Contents for intelliroute TND 515

Reviews:

Related manuals for intelliroute TND 515

Brands by name

Popular brands

Rand McNally intelliroute TND 515, User Manual

Search results

Summary of Contents for intelliroute TND 515

Reviews:

Related manuals for intelliroute TND 515

Brands by name

Popular brands