Rancilio EPOCA E, Use And Maintenance

Page: 21 / 36

57
%\SUHVVLQJEXWWRQ C WKHIDFWRU\EDUUHJXODWLRQ
is set.
After having regulated the desired pressure, press
D
to save the setting and quit the menu.
ATTENTION: during programming, water dispen-
sing is interrupted while heater pressure control is
in use.
10.2. Auto-test components
Electronic card E 06 foresees auto-testing
ZLWK ZKLFK LW LV SRVVLEOH WR YHULI\ RSHUDWLRQ RI WKH
electric/electronic components of the machine one
E\RQH
,QRUGHUWRXWLOLVHWKLVIXQFWLRQLWLVQHFHVVDU\WRHQWHU
WKHHOHFWURQLFFDUGE\GLVPDQWOLQJWKHOHIWSDQHORIWKH
machine (a descriptive label of the auto-test function
is attached to the inside of the panel).
7KHVHTXHQFHLVJXLGHGE\PHDQVRIWKHGLVSOD\DW
the centre of the electronic card.
Since the auto-test is carried out on the open
machine, be careful not to touch the parts
under voltage.
To enter the auto-test menu proceed as follows:
- Switch off the machine.
- Keeping push button
A RIWKH¿UVWJURXSSUHVVHG
¿JVZLWFKRQWKHPDFKLQH
- Push buttons A, B, C and D ¿JOLJKWXSDQG
WKH FDUG GLVSOD\ LQGLFDWHV DXWRWHVW PHQX LQ
operation).
,QWKLVPHQXRQO\SXVKEXWWRQV A, B, C, D RIWKH¿UVW
group operate with the following functions:
A = Push (increases the number/letter cor-
responding to the component to be activated).
B = Push button – (decreases the number/letter cor-
responding to the component to be activated).
C = Enter (component activation).
D = ESC (quit component activation).
'XULQJDFWLYDWLRQRIWKHFRPSRQHQWWKHGLVSOD\SRLQW
ZLOOÀDVK
(DFKYDOXHLQGLFDWHGRQWKHGLVSOD\FRUUHVSRQGVWR
the auto-test of the following components:
0 = auto-test ON
1 = electro-valve group 1 (ON for 3 seconds)
2 = electro-valve group 2 (ON for 3 seconds) (*)
3 = electro-valve group 3 (ON for 3 seconds) (*)
4 HOHFWURYDOYHKRWZDWHUVXSSO\
(ON for 3 seconds) (*)
5 = electro-valve charge (ON for 3 seconds)
6 = pump motor (ON for 3 seconds)
7 = 1st heater resistance element (ON for 5 secon-
ds) (**)
8 = 2nd heater resistance element (ON for 5 secon-
ds) (**)
9 = 3rd heater resistance element (ON for 5 secon-
ds) (**)
10. ADVANCED FUNCTIONS ELECTRONIC
CARD E06
10.1. Heater pressure regulation from push-
button panel
With card E06 it is possible to regulate heater pres-
VXUHGLUHFWO\IURPWKHSXVKEXWWRQSDQHOZLWKRXWDQ\
need whatsoever of a technician to intervene on the
internal electronics of the machine
This is possible thanks to an electronic pressure tran-
sducer that detects heater pressure in real time.
To enter the regulation menu proceed as follows:
- Switch off the machine.
- Keeping push-button
E RIWKH¿UVWJURXSSUHVVHG
¿JVZLWFKRQWKHPDFKLQH
- Push-buttons A and B will light up to indicate 1-bar
default regulation.
,QWKLVPHQXRQO\SXVKEXWWRQV A, B, C, D ¿J
RIWKH¿UVWJURXSDUHDFWLYHZLWKWKHIROORZLQJIXQF -
tions:
A = Push (pressure increase with 0.1-bar
step).
B = Push button – (pressure decrease with 0.1-bar
step).
C EDUIDFWRU\VHWDWEDU
D = ESC (regulation save and exit from menu).
To increase pressure
Press push button A , considering that each time it is
SUHVVHGKHDWHUSUHVVXUHLQFUHDVHVE\EDUVWHS
up to a maximum 1.4 bars.
3UHVVXUH LQFUHDVHV LQVWDQWO\ UHJXODWLRQ YLVLEOH E\
means of heater pressure gauge).
To decrease pressure
Press B , considering that each time it is pressed
SUHVVXUHGHFUHDVHVLQUHDOWLPHE\EDUVWHSWRD
maximum of 0.6 bars.
Opening the steam head, the new pressure regulation
FDQEHDVVHVVHGLPPHGLDWHO\E\PHDQVRIWKHKHDWHU
pressure gauge.
Push buttons A and B ÀDVK WR LQGLFDWH VHWWLQJ RI
heater pressure as follows:
LED PUSH
BUTTON A LED PUSH
BUTTON B
PRESSURE
[bar]
ON ÀDVKHV 0,6
ON ÀDVKHV 0,7
ON ÀDVKHV 0,8
ON ÀDVK 0,9
ON ON 1,0
ÀDVK ON 1,1
ÀDVKHV ON 1,2
ÀDVKHV ON 1,3
ÀDVKHV ON 1,4