uffler Outlets, Under Fuel Tank, Drive Chain, Under Seat and so on.
the vehicle completely with a great deal of water.
lean the headlight lens and other plastic parts using a cloth o r sponge
ampened with a solution of
detergent and water.
.Dry up the motorcycle, start the engine, and let it
run
for several minutes.
impaired immediately after
washing the
Anticipate longer stopping distance to avoid a possible accident.
.Test the brakes before riding the motorcycle. Several applications may be
necessary to restore
braking performance.
.Lubricate the drive chain immediately after washing and drying the
GUIDE
ome measures should be taken for storing a long term-unused vehicle so
to reduce the bad influence on its performance. Before the storage, make
necessary maintenance to ensure the vehicle high performance after-storage.
Storage
.Clean and dry
the vehicle and wax its surface.
the gasoline inside the fuel tank and carburetor, spray some anti-
rust agent.
spark plug to fill
a
little
oil (about
into the cylinder;
off the engine stop switch and tread the kick-pedal
several times to scatter evenly the oil inside the cylinder, and then rein-
stall the spark plug.
Gasoline is extremely flammable a n d is explosive u n d e r certain
conditions. Perform this operation in a well-ventilated area with the
engine stopped. Do not smoke o r allow flames o r sparks in the area
where gasoline is drained o r stored and where the fuel tank is refueled.
and oil the drive chain.
the battery and store in a dry, cool and well-ventilated place
without being shone directly.
CAUTION
When dismantling the battery, dismantle the negative lead first, and
then the positive lead. When installing, the procedure is just opposite.
During the operations above, the ignition switch must be turned off.
and oil all the controlling cables.
the muffler outlet with plastic cloth to prevent the former from
moisture.
the motorcycle (don't use plastic or other coated materials) and
store
an unheated area,
of dampness. Do not store the motorcycle
in direct sunlight.
REMOVAL FROM STORAGE
1 .Take off the cover shielding the vehicle and clean it.
the battery as required. Install the battery.
away the antirust agent inside the fuel tank, and fill fresh gasoline
instead.
all Pre-ride Inspection checks.
the motorcycle at low speeds
in a safe riding area away
