7
CAUTION
This unit is heavy. Never attempt to lift or handle without assistance.
NOTICE
It is recommended to leave the unit attached to the shipping pallet during transport until final destination.
TOOLS NEEDED
7/16" Wrench
PARTS INCLUDED
Installation Kit
SlugBuster Starter Pack
Facility Plumbing Adapter Kit
SlugBuster Powder (2 cans)
Drain Plumbing Adapter Kit
SlugBuster Mixing Jug (2 gallon)
Badger LF Installation Packet
Badger LF Muffler Kit
Badger LF Doctor's Packet
1.
Carefully remove the shipping carton from the pallet containing the Badger LF.
2. Visually inspect the entire unit for damage. If shipping damage is found, immediately contact the freight carrier
and supplier.
3. Using a 7/16" wrench, unbolt both side of Badger LF from the pallet
(FIGURE 2)
.
4. To lift and handle the unit, grasp the frame rails.
SECTION II - PREINSTALLATION
PACKAGING
FRAME RAILS
(LIFTING POINTS)
NUT & WASHER (2)
FIGURE 2. REMOVE NUT AND WASHER FROM BOTH SIDES OF PALLET
