3
D. GETTING STARTED
Vertically insert the bottle into the bottle supporter on top of
the machine. Dont’t plug the power cord or push the red
switch until water runs out from the tap of hot water.
Insert the plug to socket, then turn on the power switch.
Indicators light up accordingly once the machine works.
Vertically pull out the bottle with two hands when the bottle
is empty, then replace it with another bottle of water.
Tear the label from the bottle.
This appliance should work under environment of temp from 10
℃
~43
℃
.
This appliance is not suitable for installation in an area where a water jet
could be used.
1.
2.
3.
4.
5.
6.
E: CAUTION
Keep this machine in a dry place and avoid direct sunlight.
Rear of the machine should be at least 25cm away from the
wall. Never put the machine on paper or foam, which may
cause unstable surface, Never put anything flammable beside
this machine.
1.
To avoid damage to the machine, don’t plug the power cord or
turn on the heating switch until water runs out from the tap
of hot water.
2.
In case hot (or cold) water is not needed for a long time, turn
the switch accordingly to save power.
3.
D. OPERATION INSTRUCTION
In case when not using this machine for a long time, turn off
the switches, then pull the plug out from socket and drain the
remaining water through draining outlet.
4.
