7
c) Place the lid on the bowl and turn it clockwise
until you hear it clicks into position. The spur on the
lid sticks out of the base of the lid-locking slot (see
fig.6).
d) Use the pusher to feed food into the feeder tub.
e) Select the speed selector to your desired speed
to start.
Note:
the shredding/slicing/chipping disks can slice
thickly-potatoes, onions, thinly-cucumbers, boot root,
apples, and carrots…
f) The total operating time should not more than 3
minutes.
CLEANING
1.
Disconnect the power supply before cleaning.
2.Empty the bowl and remove the shredding/slicing/chipping disks from the disk stand,
the disk stand from the bowl, the pusher from the lid, the lid from the bowl, then
immerse the lid, pusher, bowl, disk stand and the shredding/slicing/chipping disks in
water and clean them with a soft brush. Extreme caution must be taken when
handling disks as they are very sharp.
Note:
For disassembling the disks from the disk stand, first push out one side with no
block, then push out the other side. For assembling, first push in the no block side,
then push in the other side.
3. Wipe the outside of base with cloth. Never immerse it in water as electric shock is
possible to occur. Then dry thoroughly. Ensure the interlock area is free of food
particles
Note
: Some food may discolor the disk stand. This is normal and will not harm the
plastic or effect the flavor of food. Rub with cloth dipped with vegetable oil to remove
discoloration
5. Centrifugal juicer
a) Place the bowl on the Motor unit and turn it clockwise using
the handle as the arrow on the bowl show until it locks into
place.
b) Place the filter for juice extractor into the spindle.
c) Place the lid for centrifugal juicer on the bowl and turning it
clockwise until you hear it clicks into position. The spur on the
lid sticks out of the base of the lid-locking slot (see fig.7).
Note: the lid for centrifugal juicer do not use for other
attachments.
d) Wash fruits and vegetables well, cut into strips to fit into the feeding funnel.
e) Insert the prepared ingredients into the feeding funnel and gently push down by
pusher.
f) Select the speed selector to your desired speed to start the appliance.
Fig.7
11
5
3
2
4
Fig.6
11
5
3
2
4