5
USING THE ATTACHMENTS FOR SPINDLE
Caution: While using spindle, the coupler cover must be locked into place.
1. Chopping
a) Place the bowl on the Motor unit and turn it clockwise using the handle as the
arrow on the bowl show until the bowl locks with the base.
b) Slide the metal blade onto the spindle (see fig.3).
c) Place the lid on the bowl and turn it clockwise until it clicks into position. The spur
on the lid sticks out of the base of the lid-locking slot (see fig.4)
d) Connect the appliance to power supply. Set Speed Selector to your desired speed.
You can blend up to 1L of soups, stewed fruit, etc. in two seconds. Set the speed
selector in the high speed to start the appliance. In 15-30 seconds, you can chop up
to 600g of following foodstuff:
Hard substance:
cheese, dried fruits, and certain vegetables (carrots, celery…)
Soft substance:
certain vegetables (onions, spinach…)
Raw and cooked meat
(boned and sliced)
e) The total operating time should not more than 3 minutes.
f) Turn the speed selector to 0 position after chopping. Remove the bowl from the
Motor Unit (turning the bowl anti-clockwise), take down the lid and empty the bowl.
11
5
3
2
4
Fig.3
Fig.4
11
5
3
2
4
CLEANING
1.
Disconnect the power supply before cleaning.
2. Empty the bowl and remove the lid, the metal blade, pusher, then immerse them in
water and clean them with damp cloth or soft brush. Extreme caution must be taken
when handling blade as it is very sharp.
3. Wipe the outside of base with s damp cloth. Never immerse it in water as electric
shock is possible to occur. Then dry thoroughly. Ensure the interlock area is free of
food particles
2. Kneading/mixing
a) Place the bowl on the Motor unit and turn it clockwise using the handle as the arrow
on the bowl show until the bowl locks with the base.
b) Slide the plastic blade onto the spindle.
c) Place the lid on the bowl and turn it clockwise until it clicks into position. The spur
on the lid sticks out of the base of the lid-locking slot (see fig.4)