Introduction
This guide is designed to get your WES
3
system up and running as soon as
possible.
A full manual can be obtained by signing up to the Members Area of www.
wessafety.com. Further contact information can be found on the back page.
Installing WES
3
on your site is easy. You will need to start by activate / powering
on each unit and add the units to the group so that they can communicate with
each other.
1. Initial CONNECT Setup
To activate the CONNECT control unit, hold down ‘A’ and press ‘B’ three times in
quick succession. All three LEDs will illuminate and then the amber LED will flash.
Initial setup of the CONNECT is through a series of on-screen options.
Language, Inspection Delay and Pre-Alarm mode options can be configured.
Language
• Select language - the available options are English, German, French, Spanish,
Italian and Swedish. Language settings can be changed at any time.
Inspection Delay
• The Inspection Delay setting allows an optional delay period between triggering
Setting up your WES
3
System
