Ramsey Winch Sierra H8, Operation, Service And Maintenance Manual

Page: 30 / 52

Assembling the Brake
1. Install the springs (#122) in the gear housing. Place the brake disc (#113) and cam plate (#107) on the springs.
Place the long leg of the preload spring (#120) into the hole in the input sun gear. Install the brake hub
(#112) where the short leg of the spring is in the hole of the brake hub and the brake hub is piloted on the input sun
gear.
2. Insert the brake actuator (#115) into the brake hub until it rests on the internal lugs of the brake hub. Rotate the
brake actuator and press fully into the brake hub. Insert the thrust washer (#123) into the brake actuator.
3. Press the cam pilot (#109) into the brake spacer (#108). Lubricate the O-ring (#117) with grease and place into the
groove. Place the brake spacer on the gear housing. Ensure the O-ring sits in the groove of the brake spacer.
Lubricate the O-ring (#117) and place in top groove of the brake spacers.
914281 - 1016 - A 30