Bringing into use
The power source voltage must correspond to the information on the machine.
Machines specifying 230 V can also work on 220 V.
Switching on and off
Quick-break switching
Switching on: press on/off switch.
Switching off: release on/off switch.
Button lock
Switching on: press the on/off switch and lock with the button.
Switching off: again press then release the on/off switch.
MAINTENANCE AND SERVICE
All maintenance and repairs must be carried out by the RAMSET Customer Service or a
servicer explicitly authorised by RAMSET.
The tool is designed in such a way that a minimum of maintenance and service is
required.
CAUTION: THE FOLLOWING POINTS MUST BE RESPECTED:
- The machine must be kept clean. Regularly blow out the machine.
- No other parts may be added to the machine.
- After having worked for approximately 300 hours the brushes must be checked by
a professional. The length of a new brush is 17 mm. With a length of less than 5 mm
it must be replaced by new original brushes. The cleaning of the motor part and
the application of new grease is required after approximately 300 hours.
Because after this period a complete whole overhaul is required, the machine is to be
taken to a RAMSET service centre.
