background image

8

H.  Connecting  an External  Antenna 

(Refer to Figure 3)

1. Originally,  the antenna jack of the built-in foil dipole has already been

connected to the antenna terminal behind the door at the rear of the console.

2. In case of poor images with the foil dipole, loosen the nut around the an-

tenna jack, unplug the antenna jack, and connect  the coaxial cable of an
external antenna to the antenna terminal.

3. In addition to normal broadcast reception of VHF and UHF channels, you

can connect the CATV cable directly to the antenna terminal for
CH1 ~ CH125 reception.

I.  Watching TV

1.  Press the power button to turn on the unit. The unit will enter  the mode last

committed to memory. Press the TV/AV button to select the desired TV mode.

2.  Press the auto program button to automatically  search and store the chan-

nels using the on-screen display. When the channel number on the screen
turns from red to green, the unit starts to play the 1st channel automatically.
Press the channel up and down buttons to access  your desired channel.

3.  Adjust the volume controls for  individual preference. If the picture needs to

be adjusted, use the picture button to illuminate the on-screen display for
contrast, brightness, color and tint in sequence, and use the volume button to
adjust  each function up or down.

J.  Watching a Movie

1. With power applied to the unit, select the AV mode by pressing the TV/AV

button, and push the tape cassette gently into the compartment of the VCP.
You will feel the automatic pull on the cassette as it is loaded and the VCP
will go into the play mode automatically.

2. You may carry out the procedure indicated in Step 3 for Watching TV.
3. Press the (fast) forward or rewind button to scan forward or backward, and

press it again to increase the speed.

4. Press the play button to resume the normal playing mode.
5. Pressing the auto repeat  button activates the repeat play function. When the

tape reaches  the end, the VCP will automatically rewind the tape to the
beginning and then repeat  tape play. Pressing this button again deactivates
the repeat function.

6. Press the stop/eject button to stop the playing, and press it again to eject  the

tape.

NOTE: DEW Indicator

The word DEW  will be displayed on the screen to indicate excessive moisture

Summary of Contents for 1286016A













Reviews: