background image

A.  Introduction

The EZCRG is a self-contained entertainment center in your vehicle which
makes your road trips enjoyable. This versatile floor console incorporates a
high brightness 5” color TV and vertical eject Video Cassette Player, complete
with a built-in speaker, a built-in foil antenna, headphone jacks, AV input jacks,
AV output jacks and a universal remote control.
Installed between the driver and passenger front seats, with a floor mounting plate
available for most cars, vans and trucks.  This aesthetic console is constructed
of two-tone, gray textured plastic with an extra cup holder, jack cover, protective
bar and cigarette lighter jack to compliment your vehicle’s decor.  The EZCRG
standard manufacture ensures reliability and longevity.  Please read the following
instructions thoroughly for correct installation and proper operation.  Store this
manual in a convenient and safe place for future reference.

B.  Precaution

1.  Use only good quality VHS tapes and discard worn out tapes to prevent video

head clogging.  If the heads get dirty over a period of time during normal
operation of the VCP, and the automatic tracking control will not remove the
snow from the picture we recommend using a cleaning cartridges sparingly
to restore normal picture.

2. In order to maintain a safe mounting arrangement, this console must be

secured to the floor of the vehicle according to Installation Guide contained in
this  manual. Failure to do so may result in the console becoming a projectile
in the event of an accident.

3. Before working under the vehicle, block the wheels to prevent accidental injury.
4. Before drilling any holes in the vehicle, verify that the drill bit will not enter into

the frame rail(s) of the vehicle of damage electrical wires, fuel lines, brake lines,
hoses, exhaust system components or any other items that will impair that
operation of the vehicle.  The console must be secured to the floor panel of the
vehicle.  Check under the vehicle to ensure that the holes will be in the
proper locations.  Also check under the carpet to ensure that there are no wiring
harnesses, fuel lines, etc. that could be damaged when drilling through the floor
pan of the vehicle.

     

CAUTION:

Children should not be allowed to wear headphones unless
carefully supervised.  The headphone wires may become
entangled and induce choking.

5. Do not use gasoline, thinners or other thinning liquids to clean the unit.

Remove dust and stains with a damp cloth.

6.  Do not cover the unit with a cloth during operation; the internal temperature

will rise and may damage the unit.

2

Summary of Contents for 1286016A













Reviews: