10
1.
TV POWER
Button
Press this button to switch the unit on or off .
2.
Number
Buttons (0-9)
Press these buttons to make a direct TV channel selection. The channel
number chosen will be displayed on the screen for about 4 seconds.
3.
SKIP/SEARCH
Button
a. Press this button until SKIP MODE ON is displayed on the screen.
Then use the channel up and down buttons’; the TV will stop only on the
active TV channels.
b. Press the skip search key until SKIP MODE OFF is displayed on the screen.
Then all the TV channels will be shown using the channel up and down
buttons.
4.
TV/CATV
Button
Press this button to select the regular 69-channel Broadcast TV and the 125-
Channel Cable TV (Standard Cable, HRC Cable, and IRC Cable) with the
on- screen display.
5.
VCP POWER
Button
Plug in the unit; the power indicator will turn on. Press this button to switch
the VCP on or off . The indicator will be brighter when the unit is on.
6.
REW
Button
a. Press this button once in the playback mode, the VCP enters the reverse
picture search mode and the tape will rewind rapidly with the pictures. The
rewind indicator lamp will blink. Press this button once more, and the tape
will rewind at a high speed with the lamp blinking more quickly.
b. Press this button in the stop mode; the tape will rewind at a very high speed
without any picture and sound.
c. Press this button once in the (fast) forward mode; the VCP enters the
reverse picture search mode and the tape will rewind rapidly with the pic-
tures. The rewind indicator lamp will blink. Press this button once more,
and the tape will rewind at a high speed.
7.
F. FWD
Button
a. Press this button once in the playback mode; the VCP enters the forward
picture search mode and the tape advances rapidly with the pictures. The
fast forward indicator lamp will blink. Press this button once more, and the
tape will advance at a high speed with the lamp blinking more quickly.
b. Press this button in the stop mode, the tape will advance at a very high
speed without any picture and sound.
c. Press this button once in the (fast) rewind mode; the VCP enters the for-
ward picture search mode and the tape advances rapidly with the pictures.
The fast forward indicator lamp will blink. Press this button once more, and
the tape will advance at a high speed.
Summary of Contents for 1286016A
Page 1: ...EZCRG Owner s Manual ...
Page 5: ...5 Figure 2 a ...
