23
Brake Reach
Some bikes have adjustable brake levers. These can be adjusted to fit
each individual rider’s specific needs. For
example, if you have a short reach, you may need the levers adjusted closer to the handlebar. This adjustment
or brake lever replacement should be done by a qualified bike technician or bike shop.
DISC BRAKES AND DISCS CAN GET VERY HOT DURING USE AND COULD BURN SKIN. ALSO, THE DISC EDGES
MAY BE SHARP AND COULD CUT SKIN. AVOID TOUCHING THE DISC OR DISC BRAKE WHEN HOT, OR WHEN
ROTATING.
Handlebar stem and front wheel alignment
• Make sure the front wheel and hand
lebar stem are aligned in the proper orientation to each other.
• Turn the handlebar from side to side with the front wheel locked between your knees to test the stem
connection of the fork. If any movement is noted do not ride the bike until this is corrected.
• Inspect cable routing to be sure the handlebars can turn freely without binding or pinching the cables. Check
to be sure that your hand grips on the handlebars are in good condition and the bars are not protruding
through the grip.
Seat Position
The saddle should be adjusted for proper fit and is an important factor in riding safely. Place your pedals in the
6 o’clock and 12 o’clock position. Your bottom leg should be very slightly bent when the ball of your foot is
placed on the lower pedal. If
it’s bent too much you need to raise the saddle. If you have to rock your hips to
reach or can’t easily reach, you must lower the saddle. Ensure that the saddle is straight and level.
Seat and Seat Post
Check that the seat is securely mounted on the seat post by lifting up and down on the seat. This should not
tilt or move. Next, check the security of the seat post in the frame by attempting to rotate the seat. If the seat
rotates, then the seat tube is not properly clamped into the frame.
