(A) Clip
(B) Fixing bracket
(C) Screw
You should insert a clip (A) into the holes which are located in each corner of the hob.
Place the fixing brackets (B) over each hole and clip, and then place a screw (C)
through the hole and fixing bracket (B). Tighten the screws slowly. IMPORTANT: Do
not tighten the screws fully.
Carefully turn the hob back over and then gently lower it into the aperture hole that
you have cut out.
On the underneath of the hob, locate the fixing brackets (B) and turn them so that they
locate on the underneath of the worktop and the hob.
Fully tighten the screws (C) to secure the hob into position.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This appliance must be wired into a 30 A fused spur outlet, having 3 mm contact
separation and placed in an easily accessible position adjacent to the unit.
Cable type: EC2-27, SJT 3 core x 3.31 mm
²
Cable type: EC2-30, H05 RR-F 3 core x 1.5 mm
²
Cable type: EC4-60, H05 RR-F 3 core x 2.5 mm
²
