7
For Machines sent Local without packing lift the machine using lifting bolts only.
Never lift the machine by its spindle or by
cross or magnetic slide wheels. It could
damage / bend the sleeve or shaft.
Unpacking
When unpacking the crate, take apart the upper cover, then the cover marked
as “this first” followed by the rest.
Do not use hammer to break down the crate, please use nail extruder instead.
To avoid damaging the machine or paint, pay more attention when take away
the wooden covers
Loosen the fixing screws before lifting machine, and then remove the bottom
board.
Choice of site
The output of the machine and the degree of accuracy of the components produced
depend to a great degree on the correct choice of site for the erection of the machine.
The grinding machine are often found between milling, shaping, drilling and even
slotting machine, without any thought to the cons of such planning. In such cases, it
is impossible to achieve good surface finish, as the vibrations from the milling
machine or jerks from the reversal of the shaper stroke, etc. are transmitted to the
grinding machine .Chatter marks can be found on the ground surface, which are due
to these extraneous influences. Un-solid floor is unsuitable for the machine as it
results in distortion of the machine.
Machine Size
Net Weight (in Kgs approx.)
7x14
650
9x14
700
9x18
800
10x20 Plain
850
10x20 Excello
950
12x24
1100
15x30
1350