6
Don’t
Persons wearing ties, gloves, loose fitting clothing and shirts with very long
sleeves must not operate or maintain the machine.
Operation personnel must not lean on the machine.
Combustible liquids must not be used as a cutting fluid.
The machine should not be used to grind lumber, plastics or other combustible
materials.
When grinding, besides securely mounting the work piece, one should make
sure no other object is placed on the machine.
After the wheel spindle motor is turned off, do not use your hand or any other
object to stop or slow down the grinding wheel.
During grinding and before the grinding wheel stops rotating after work is
finished; do not attempt to clean the shavings of the work piece or to move the
work piece.
When taking off the grinding wheel, use a flange remover to detach it. Do not
use any method that involves pounding the grinding wheel. This could result in
damage to the grinding wheel.
Transit
THIS MACHINE HAS BEEN FULLY TESTED, ADJUSTED AND INSPECTED
FOR CORRECT ALIGNMENT AND OPERATION PRIOR TO DISPATCH, IN
TRANSIT OR INSTALLATION, PLEASE ENSURE THAT THE MACHINE IS
NOT BUMPED WHEN BEING ROLLED OR SET DOWN TO AVOID ANY
FAILURE.
By Fork lifter
or
By Hoist