18
8.
Warranty Terms & Conditions
We provide warranty cover for this Machine subject to the following conditions:
1.
In accordance with the under-mentioned conditions ( 2 to 8 ), we will rectify
defects affecting the machine which are clearly attributable to material and/or
manufacturing faults, provided they are reported immediately after being
identified, and within 12 months of the date of purchase (the “Warranty Period”).
2.
Service may not be available to all the parts of India. Please check with your
retailer or contact us directly.
3.
The warranty will not be applicable to fragile items such as cosmetic parts or
consumable items such as screw, spindle bearings. Warranty liability will not be
triggered by minor variances from nominal features which are of no significance to
the Machine's value or fitness for purpose, or damage caused by the chemical or
electrochemical effects of water and generally by exceptional environmental
conditions, inappropriate operating conditions, or the Machine having come into
contact with unsuitable materials. Likewise, no warranty liability will be accepted if
the defects stem from transport damage for which we are not responsible,
improper installation and assembly, improper use, to also include where Machine
has been used in a non-industrial environment, poor maintenance, failure to
observe operating/assembly instructions or in case of any accident.
4.
For noise related complaints inform us immediately, if the cause of noise is
motor/starter then it will be covered under warranty but for spindle bearing it will
be covered only if the complaint is registered within first 3 months of warranty
period.
5.
We reserve the right to invalidate the warranty: -
a)
If repairs or other interventions are performed by persons not authorised by
us to take such action, or if our Machines are fitted with non-original spare
parts, extras or accessories; or
b)
In the event of physical or verbal abuse towards any member of staff.
6.
For any work done under warranty we will decide whether this will take the form
of a repair or the replacement of the Machine part. Small Machine parts that can
reasonably be transported or posted may need to be handed over or shipped to our
site. All other Machine defects will be repaired on site. A purchase receipt must be
presented in each case. Replaced parts pass into our ownership.
7.
In the event of a replacement of Machine part being supplied, we reserve the right
to charge visiting charges.
8.
The provision of services under warranty neither extends the term of the warranty
nor sets in motion a new Warranty Period. The Warranty Period for spare parts
fitted ends with the expiry of the warranty on the Machine as a whole.