STARTING PROCEDURES
Your vehicle uses the same starting procedures as de-
scribed in the Ram 1500/2500/3500 Owner’s Manual. No
special starting instructions are required.
NOTE:
Periodically the vehicle will automatically switch
from operation on CNG to Gasoline for a short duration,
depending on conditions. This is done for a number of
reasons, including to maintain the freshness and appropri-
ate seasonal blend of gasoline, to ensure maintenance of
the gasoline injectors and/or to meet high-load demands.
FUEL REQUIREMENTS
United States
Use only natural gas which meets the requirements for gas
quality as specified in National Fire Protection Association
NFPA52 and American National Standard ANSI/ AGA
NGV2. Use of natural gas that does not meet these require-
ments may result in starting and driveability problems and
damage to critical fuel system components.
Canada
Use only natural gas which meets the requirements for gas
quality as specified in Canadian Standards Association
(CSA) B51–M1991 G4.1.2 or SAE J1616. Use of natural gas
that does not meet these requirements may result in
starting and driveability problems and damage to critical
fuel system components.
16
STARTING AND OPERATING
Summary of Contents for TRUCK 2500 2017
