RAM Ram 1500 2012 Owner'S Manual Download Page 58 | Manualshive

Page: 58 / 726

RAM Ram 1500 2012 Owner'S Manual Download Page 58

This vehicle may also be equipped with Supplemental
Side Air Bag Inflatable Curtains (SABIC) to protect the
driver, front, and rear passengers sitting next to a win-
dow. If the vehicle is equipped with SABIC air bags, they
are located above the side windows and their covers are
also labeled: SRS AIRBAG.

This vehicle may also be equipped with Supplemental
Seat-Mounted Side Air Bags (SAB) to provide enhanced
protection for an occupant during a side impact. If the
vehicle is equipped with Supplemental Seat-Mounted
Side Air Bags they are located in the outboard side of the
front seats.

NOTE:

•

Air Bag covers may not be obvious in the interior trim,
but they will open during air bag deployment.

•

After any accident, the vehicle should be taken to an
authorized dealer immediately.

Air Bag System Components

Your vehicle may be equipped with the following air bag
system components:

•

Occupant Restraint Controller (ORC)

•

Air Bag Warning Light

•

Steering Wheel and Column

•

Instrument Panel

•

Knee Impact Bolster

•

Driver Advanced Front Air Bag

•

Passenger Advanced Front Air Bag

•

Supplemental Seat-Mounted Side Air Bags (SAB) — if
equipped

•

Supplemental Side Air Bag Inflatable Curtains
(SABIC) — if equipped

56

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
56
57
58
59
60
...
»

Summary of Contents for Ram 1500 2012























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments