Home
/
RAM
/
Ram 1500 2012
/
Owner'S Manual

RAM Ram 1500 2012, Owner'S Manual, Page: 514 / 726

Share

Page: 514 / 726

RAM Ram 1500 2012 Owner'S Manual Download Page 514

TIRE ROTATION RECOMMENDATIONS

Tires on the front and rear axles of vehicles operate at
different loads and perform different steering, driving,
and braking functions. For these reasons, they wear at
unequal rates.

These effects can be reduced by timely rotation of tires.
The benefits of rotation are especially worthwhile with
aggressive tread designs such as those on all season type
tires. Rotation will increase tread life, help to maintain
mud, snow and wet traction levels and contribute to a
smooth, quiet ride.

Refer to the “Maintenance Schedule” for the proper
maintenance intervals. More frequent rotation is permis-
sible if desired. The reasons for any rapid or unusual
wear should be corrected prior to rotation being per-
formed.

The suggested rotation method is the “forward cross”
shown in the following diagram. This rotation pattern
does not apply to some directional tires that must not be
reversed.

Tire Rotation

512

STARTING AND OPERATING

«
...
512
513
514
515
516
...
»

Summary of Contents for Ram 1500 2012























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments