3. If using another vehicle to jump start the
battery, park the vehicle within the jumper
cables reach, apply the parking brake and
make sure the ignition is OFF.
WARNING!
Do not allow vehicles to touch each other
as this could establish a ground connec-
tion and personal injury could result.
Jump Starting Procedure
WARNING!
Failure to follow this jump starting proce-
dure could result in personal injury or
property damage due to battery explosion.
CAUTION!
Failure to follow these procedures could
result in damage to the charging system of
the booster vehicle or the discharged ve-
hicle.
Connecting The Jumper Cables
1. Connect the positive
(+)
end of the jumper
cable to the remote positive
(+)
post of the
discharged vehicle.
NOTE:
The remote positive
(+)
post is located in
the engine compartment on the driver's
side under the cover of the Front Power
Distribution Center.
2. Connect the opposite end of the positive
(+)
jumper cable to the positive
(+)
post of
the booster battery.
3. Connect the negative end
(-)
of the jumper
cable to the negative
(-)
post of the
booster battery.
4. Connect the opposite end of the negative
(-)
jumper cable to the remote negative
(-)
post of the discharged vehicle.
NOTE:
The remote negative
(-)
post is located in
the front of the engine compartment on
the driver's side.
WARNING!
Do not connect the jumper cable to the
negative (-) post of the discharged battery.
The resulting electrical spark could cause
the battery to explode and could result in
personal injury. Only use the specific
ground point, do not use any other exposed
metal parts.
5. Start the engine in the vehicle that has the
booster battery. Let the engine idle a few
minutes and then start the engine in the
vehicle with the discharged battery.
6. Once the engine is started, disconnect the
jumper cables in the reverse sequence:
Disconnecting The Jumper Cables
1. Disconnect the negative end
(-)
of the
jumper cable from the remote negative
(-)
post of the vehicle with the discharged
battery.
2. Disconnect the opposite end of the nega-
tive
(-)
jumper cable from the negative
(-)
post of the booster battery.
111
Summary of Contents for PROMASTER 2018
