DRIVER ADJUSTABLE PEDALS — IF EQUIPPED
The adjustable pedals system is designed to allow a greater range of driver comfort for
steering wheel tilt and seat position. This feature allows the brake, accelerator, and
clutch pedals (if equipped) to move toward or away from the driver to provide
improved position with the steering wheel.
The adjustable pedal switch is located to the left side of the steering column.
• The pedals can be adjusted with the ignition OFF.
• The pedals
cannot
be adjusted when the vehicle is in REVERSE or when the
Electronic Speed Control System is on. The following messages will be displayed
on vehicles equipped with the Electronic Vehicle Information System (EVIC) or
Driver Information Display (DID) if the pedals are attempted to be adjusted when
the system is locked out (“Adjustable Pedal Disabled — Cruise Control Engaged”
or “Adjustable Pedal Disabled — Vehicle In Reverse”).
NOTE:
• Always adjust the pedals to a position that allows full pedal travel.
• Further small adjustments may be necessary to find the best possible seat/pedal
position.
• For vehicles equipped with Driver Memory Seat, you can use your Remote Keyless
Entry (RKE) Key Fob or the memory switch on the driver’s door trim panel to return
the adjustable pedals to pre-programmed positions. Refer to “Front Seats” in
“Getting Started” for further information.
WARNING!
Do not adjust the pedals while the vehicle is moving. You could lose control and
have an accident. Always adjust the pedals while the vehicle is parked.
CAUTION!
Do not place any article under the adjustable pedals or impede its ability to move
as it may cause damage to the pedal controls. Pedal travel may become limited if
movement is stopped by an obstruction in the adjustable pedal's path.
G E T T I N G S T A R T E D
40
Summary of Contents for Chassis CAB 4500 2016
Page 226: ...NOTES 224...
