5. Shift the transmission into NEUTRAL.
• With manual shift transfer case, shift the transfer case lever to the desired
position.
• With electronic shift transfer case, push and hold the transfer case NEUTRAL
(N) button until the NEUTRAL (N) indicator light turns off. After the NEUTRAL
(N) indicator light turns off, release the NEUTRAL (N) button. After the
NEUTRAL (N) button has been released, the transfer case will shift to the
position indicated by the selector switch.
NOTE:
When shifting the transfer case out of NEUTRAL (N), the engine should remain OFF
to avoid gear clash.
6. Shift automatic transmission into PARK.
7. Release the brake pedal (and clutch pedal on a manual transmission).
8. Disconnect vehicle from the tow vehicle.
9. Start the engine.
10. Press and hold the brake pedal.
11. Release the parking brake.
12. Shift the transmission into gear, release the brake pedal (and clutch pedal on
manual transmissions), and check that the vehicle operates normally.
NOTE:
With electronic shift transfer case:
• Steps 3 through 5 are requirements that must be met before pressing the
NEUTRAL (N) button, and must continue to be met until the shift has been
completed. If any of these requirements are not met before pushing the NEUTRAL
(N) button or are no longer met during the shift, the NEUTRAL (N) indicator light
will flash continuously until all requirements are met or until the NEUTRAL (N)
button is released.
• The ignition switch must be in the ON/RUN position for a shift to take place and
for the position indicator lights to be operable. If the ignition switch is not in the
ON/RUN position, the shift will not take place and no position indicator lights will
be on or flashing.
• A flashing NEUTRAL (N) position indicator light indicates that shift requirements
have not been met.
U T I L I T Y
144
Summary of Contents for Chassis CAB 4500 2016
Page 226: ...NOTES 224...
