RAM CHASSIS CAB 2015 Owner'S Manual Download Page 218

Page: 218 / 597

Vehicles Equipped With Passive Entry

1. Without pushing the brake pedal, push the ENGINE

START/STOP button and cycle the ignition to the
ON/RUN position (do not start the engine).

2. Push and release the DOWN arrow button to scroll

downward through the main menu to “Vehicle Info.”

3. Push and release the RIGHT arrow button to access

the “Oil Life” screen.

4. Push and hold the RIGHT arrow button for one

second to access the “Oil Life Reset” screen.

5. Push and release the DOWN arrow button to select

“Yes,” then push and release the RIGHT arrow button
to select reset of the Oil Life.

6. Push and release the UP arrow button to exit the EVIC

screen.

Vehicles Not Equipped With Passive Entry

1. Without pushing the brake pedal, cycle the ignition to

the ON/RUN position (do not start the engine).

2. Push and release the DOWN arrow button to scroll

downward through the main menu to “Vehicle Info.”

3. Push and release the RIGHT arrow button to access

the “Oil Life” screen.

4. Push and hold the RIGHT arrow button for one

second to access the “Oil Life Reset” screen.

5. Push and release the DOWN arrow button to select

“Yes,” then push and release the RIGHT arrow button
to select reset of the Oil Life.

6. Push and release the UP arrow button to exit the EVIC

screen.

216

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for CHASSIS CAB 2015






















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 2015

Reviews:

Related manuals for CHASSIS CAB 2015

Brands by name

Popular brands

RAM CHASSIS CAB 2015, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 2015

Reviews:

Related manuals for CHASSIS CAB 2015

Brands by name

Popular brands