RAM 2011 1500 Owner'S Manual Download Page 30 | Manualshive

Page: 30 / 622

RAM 2011 1500 Owner'S Manual Download Page 30

DOOR LOCKS

Manual Door Locks

Front and rear doors may be locked by moving the lock
knob down or unlocked by moving the lock knob up.

Front doors may be opened with the inside door handle
without lifting the lock knob.

Doors locked before closing will remain locked when
closed.

The emergency key will unlock the driver door lock on
your vehicle.

WARNING!

•

For personal security and safety in the event of an
accident, lock the vehicle doors when you drive as
well as when you park and leave the vehicle.

•

Never leave children alone in a vehicle. Leaving
unattended children in a vehicle is dangerous for a
number of reasons. A child or others could be
seriously or fatally injured. Don’t leave the key in
the ignition. A child could operate power win-
dows, other controls, or move the vehicle.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

29

«
...
28
29
30
31
32
...
»

Summary of Contents for 2011 1500















































































































































































































































































































































































































































































































































































































































Reviews:

No comments