RAM 2011 1500 Owner'S Manual Download Page 149

Page: 149 / 622

CAUTION!

•

To avoid vehicle damage, ParkView

威

should only

be used as a parking aid. The ParkView

威

camera is

unable to view every obstacle or object in your
drive path.

•

To avoid vehicle damage, the vehicle must be
driven slowly when using ParkView

威

to be able to

stop in time when an obstacle is seen. It is recom-
mended that the driver look frequently over his/
her shoulder when using ParkView

威

NOTE:

If snow, ice, mud, or any foreign substance

builds up on the camera lens, clean the lens, rinse with
water, and dry with a soft cloth. Do not cover the lens.

Turning ParkView

姞

On or Off — With

Navigation/Multimedia Radio

1. Press the “menu” hard key.

2. Select “system setup” soft key.

3. Press the “camera setup” soft key.

4. Enable or disable the rear camera feature by selecting
“enable rear camera in reverse” soft key.

5. Press the “save” soft key.

Turning ParkView

姞

On or Off — Without

Navigation/Multimedia Radio

1. Press the “menu” hard key.

2. Select “system setup” soft key.

3. Enable or disable the rear camera feature by selecting
“enable rear camera in reverse” soft key.

148

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2011 1500















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 1500

Reviews:

Related manuals for 2011 1500

Brands by name

Popular brands

RAM 2011 1500, Owner'S Manual

Search results

Summary of Contents for 2011 1500

Reviews:

Related manuals for 2011 1500

Brands by name

Popular brands