RAM 2011 1500, Owner'S Manual

Page: 272 / 622

This feature allows an iPod
威
to be plugged into the
vehicle’s sound system through a 16–pin connector, using
the provided interface cable.
UCI supports Mini, 4G, Photo, Nano, 5G iPod
威
and
iPhone
威
devices. Some iPod
威
software versions may not
fully support the UCI features. Please visit Apple’s
website for software updates.
NOTE:
•
If the radio has a USB port, refer to the appropriate
Uconnect Multimedia radio user’s manual for iPod or
external USB device support capability.
•
Connecting an iPod
威
to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
Connecting The iPod
姞
Use the provided connection cable to connect an iPod
威
to
the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod
威
is connected and synchronized to the vehicle’s UCI
system (iPod
威
may take a few seconds to connect), the
iPod
威
starts charging and is ready for use by pressing
radio switches, as described below.
NOTE:
•
It may be necessary to remove the connector pin
protection cap from the 16–pin connector port, prior to
connecting the cable.
•
If the iPod
威
battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod
威
connected
to the UCI system may charge it to the required level.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 271