RAM 1500 CLASSIC 2022, Owner'S Manual, Page: 25 / 364

GETTING TO KNOW YOUR VEHICLE 23
R
EMOTE
S
TART
A
BORT
M
ESSAGE
The following messages will display in the
instrument cluster display if the vehicle fails to
remote start or exits Remote Start prematurely:

Remote Start Cancelled — Door Open

Remote Start Cancelled — Hood Open

Remote Start Cancelled — Fuel Low

Remote Start Cancelled — System Fault

Remote Start Disabled — Start Vehicle to Reset
The message will stay active until the ignition is
placed in the ON/RUN position.
VEHICLE SECURITY SYSTEM
The Vehicle Security system monitors the vehicle
doors, hood, tailgate, and the ignition for
unauthorized operation. While the Vehicle Security
system is armed, interior switches for door locks
are disabled. If something triggers the alarm, the
Vehicle Security system will provide the following
audible and visible signals:

The horn will pulse

The turn signals will flash

The Vehicle Security Light in the instrument
cluster will flash
T
O
A
RM
T
HE
S
YSTEM
Follow these steps to arm the Vehicle Security
system:
1. Make sure the vehicle’s ignition is placed in
the OFF position.

For vehicles equipped with Keyless Entry,
make sure the vehicle’s keyless ignition
system is OFF.

For vehicles not equipped with Keyless
Entry, make sure the vehicle ignition is OFF
and the key fob is physically removed from
the ignition.
2. Perform one of the following methods to lock
the vehicle:

Push the lock button on the interior power
door lock switch with the driver and/or
passenger door open.

Push the lock button on the exterior Passive
Entry door handle with a valid key fob avail -
able in the same exterior zone
Ú
page 25.

Push the lock button on the key fob.
3. If any doors are open, close them.
T
O
D
ISARM
T
HE
S
YSTEM
The Vehicle Security system can be disarmed using
any of the following methods:

Push the unlock button on the key fob.

Grab the Passive Entry door handle to unlock
the door
Ú
page 25.

Cycle the ignition out of the OFF position to
disarm the system.

For vehicles equipped with Keyless Enter ‘n
Go™ — Ignition, push the START/STOP igni -
tion button (requires at least one valid key
fob in the vehicle).

For vehicles not equipped with Keyless
Enter ‘n Go™, insert a valid key fob into the
ignition switch and turn the key to the ON/
RUN position.
The Vehicle Security system is designed to protect
your vehicle. However, you can create conditions
where the system will give you a false alarm. If one
of the previously described arming sequences has
occurred, the Vehicle Security system will arm
regardless of whether you are in the vehicle or not.
If you remain in the vehicle and open a door, the
alarm will sound. If this occurs, disarm the Vehicle
Security system.
2
22_DS_OM_EN_USC_t.book Page 23