RAM 1500 2023 Page 394 Owner'S Manual Download

Page: 394 / 416

392

TECHNICAL SPECIFICATIONS

VEHICLE IDENTIFICATION NUMBER (VIN)

The VIN is found on the left front corner of the instrument

panel, visible through the windshield.

Vehicle Identification Number

NOTE:

It is illegal to remove or alter the VIN.

BRAKE SYSTEM

If power assist is lost for any reason (for example,

repeated brake applications with the engine off), the

brakes will still function. However, you will experience a

substantial increase in braking effort to stop the vehicle.

If either the front or rear hydraulic systems lose normal

braking capability, the remaining system will still function

with some loss of overall braking effectiveness. This will

be evident by increased pedal travel during application,

greater pedal force required to slow or stop, and the Brake

Warning Light and the Anti-Lock Brake System (ABS)

Warning Light will activate during brake use.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure that

the wheel is properly mounted to the vehicle. Any time a

wheel has been removed and reinstalled on the vehicle,

the lug nuts/bolts should be torqued using a properly

calibrated torque wrench using a six-sided (hex) deep wall

socket.

ORQUE

PECIFICATIONS

**Use only authorized dealer recommended lug

nuts/bolts and clean or remove any dirt or oil before

tightening.

NOTE:

Do not oil wheel studs. For chrome wheels, do not

substitute with chrome plated wheel nuts.
Inspect the wheel mounting surface prior to mounting the

tire and remove any corrosion or loose particles.

Wheel Mounting Surface

Tighten the lug nuts/bolts in a star pattern until each nut/

bolt has been tightened twice. Ensure that the socket is

fully engaged on the lug nut/bolt (do not insert it halfway).

Lug Nut/

Bolt Torque

Lug Nut/

Bolt Type

**Lug Nut/

Bolt Size

Lug Nut/

Bolt Socket

Size

130 ft-lb

(176 N·m)

Cone

M14 x 1.50

22 mm

23_DT_OM_EN_USC_t.book Page 392

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands

RAM 1500 2023, Owner'S Manual

Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands