Ram Trucks 1500, User Manual

Page: 57 / 364

Regular And Mega Cab Trucks:
In the regular cab truck, the top tether anchorages are located behind the center and
right passenger seats. In the mega cab truck, the top tether anchorages are located
behind each rear seating position. There is a plastic cover over each anchorage. To
attach the tether strap of the child restraint:
1. Place the child restraint on the seat and adjust the tether strap so that it will reach
over the seat back, under the head restraint and to the tether anchor directly
behind the seat.
2. Route the tether strap to provide the
most direct path between the anchor-
age and the child seat. The tether
strap should go between the head
restraint posts underneath the head
restraint. You may need to adjust the
head restraint to the upward position
to pass the tether strap underneath
the head restraint and between its
posts.
3. Lift the cover (if so equipped), and
attach the hook to the square opening
in the sheet metal. Tighten the tether
strap according to the child seat
manufacturer’s instructions.
Regular Cab Tether Anchorages
1 — Tether Strap Hook
2 — Tether Strap To Child Restraint
3 — Tether Anchor
Mega Cab Tether Anchorages
G E T T I N G S T A R T E D
55