Driver’s Seat
Lumbar Support — If Equipped
This feature allows you to increase or
decrease the amount of lumbar support. The
lumbar control knob is located on the rear
upper outboard side of the driver's seatback.
Rotate the control forward to increase and
rearward to decrease the desired amount of
lumbar support.
Height Adjustment (Without Swivel Seat) — If
Equipped
The height adjusting levers are located on
the center outboard side of the seat. Lift the
front lever with little or no weight applied to
the seat, to raise the front on the seat. Lift
the front lever with weight applied to the seat
to lower it. Follow these instructions for the
rear lever to adjust the rear of the seat.
Height Adjustment (With Swivel Seat) — If
Equipped
The height adjusting knobs are located on
the center outboard side of the seat. Rotate
the front knob to adjust the front of the seat
up or down. Rotate the rear knob to adjust
the rear of the seat up or down.
Recliner Adjustment
The recliner knob is on the rear outboard side
of the seat. To recline the seatback, lean
back, rotate the knob rearward to position
the seatback as desired. To return the seat
-
back to its normal upright position, lean
forward, rotate the knob forward until the
seatback is in the upright position.
Heated Seats — If Equipped
Heated Seat Switch
On some models, the front driver and
passenger seats may be equipped with
heaters in both the seat cushions and seat
-
backs. The controls for the front heated seats
are located on the lower outboard side of the
seat.
To Turn Heated Seats On/Off
1. Push the switch once to turn on the
heated seats.
2. Push the switch a second time to shut
the heating elements off.
1 — Forward/Rearward Adjustment Bar
2 — Front Height Adjusting Lever
3 — Rear Height Adjusting Lever
4 — Recliner Adjusting Knob
5 — Lumbar Adjustment Knob
20_VF_QRG_EN_US_t.book Page 2
