30
Raloy Manual
Step 5
Connect the first computer’s mouse cable to the RA15/17KVM16. If using a PS/2 cable,
connect one end to the PS/2 mouse port on the computer, and the other end to the PC1 PS/2
mouse port on the back of RA15/17KVM16. If using a serial mouse cable (optional), connect
one end to a DB-9 serial port on the computer, and the other end to the PC1 DB-9 serial mouse
port on the back of the RA15/17KVM16. If you need Serial DB-9 to PS2 Mini Din 6 pin adapter,
please contact your supplier.
The rear side of PC
Step 6
Connect the first computer’s keyboard cable to the RA15/17KVM16. Using another PS/2 cable
connect one end to PS/2 keyboard port on the computer, and the other end to the PC1
keyboard port on the back of KVM unit. If your computer has an AT type keyboard port, you will
need a PS/2 to AT keyboard adapter.
The rear side of PC
Step 7
Double-check all of the connections. You can check the color of keyboard and mouse
connector to make sure the keyboard and mouse cables go to the correct ports.
Step 8
Repeat step 5 to 7 for the remainder of the computers.
Step 9
Attach the power supply to the KVM unit and plug the other end into an electrical receptacle.
Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your monitor.
Summary of Contents for Slim 1U Rackmount
