19
Raloy Manual
Hardware Installation
Before installation, please make sure all of peripherals and computers have been turned off.
Step 1
Now the PC connections can be made with the monitor (VGA) connections first. Connect a
VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the rear panel
of the KVM switch to the connector labeled VGA. Repeat this for all PCs.
Step 2
Connect the first computer’s mouse cable to the RA15/17KVM8. If using a PS/2 cable, connect
one end to the PS/2 mouse port on the computer, and the other end to the PC1 PS/2 mouse
port on the back of RA15/17KVM8. If using a serial mouse cable (optional), connect one end to
a DB-9 serial port on the computer, and the other end to the PC1 DB-9 serial mouse port on the
back of the RA15/17KVM8. If you need Serial DB-9 to PS2 Mini Din 6 pin adapter, please
contact your supplier.
Step 3
Connect the first computer’s keyboard cable to the KVM Switch. Using another PS/2 cable connect one
end to PS/2 keyboard port on the computer, and the other end to the PC1 keyboard port on the back of
RA15/17KVM8. If your computer has an AT type keyboard port, you will need a PS/2 to AT keyboard
adapter.
Step 4
Double-check all of the connections. You can check the color of keyboard and mouse
connector to make sure the keyboard and mouse cables go to the correct ports.
Step 5
Repeat step 2 to 4 for the remainder of the computers.
Summary of Contents for Slim 1U Rackmount
