40
Alm SuperLog: An alarm will sound to alert the supervisor that
the logs are full. The set number is the remaining log capacity
before the logs are full, set from 0-99.
Alm AttLog: An alarm will sound when the logs are full. The set
number is the remaining log capacity before the logs are full, set
from 0-99.
ReCheck Min: Set the number of minutes before another punch
is accepted by the time clock. If a punch occurs within the
ReCheck Minutes, the punch will not be logged. This reduces
duplicate (accidental) punches.
Auto Test
Select “Auto Test”, press [OK], the following appears:
These options allow the testing of each portion of the time clock in order
to pinpoint failures.
WARNING: Do not disconnect or interrupt power while
performing any of the tests (loss of power during testing may
damage the hardware.
Auto Test
▼
►
Run All Test
FLASH Test
LCD Test
----------------------------
Voice Test
FP Test
Key Test
RTC Test
